Before a mould trial: agree the material drying record
Agree grade-specific material records, observed preparation conditions and sample identity before comparing mould-trial results.
Before a mould trial: agree the material drying recordHot-runner colour changes: agree the trial record before accepting the mould
Agree starting conditions, time and material boundaries, sample sequence and acceptance before comparing a hot-runner colour change.
Hot-runner colour changes: agree the trial record before accepting the mouldMould Vent Maintenance: A Comparable Trial Record
Connect vent condition, maintenance actions and comparable samples before attributing a filling defect to venting.
Mould Vent Maintenance: A Comparable Trial RecordMould Cooling Circuit Handover: Map, Flow and Temperature Records
Agree circuit IDs, supply conditions and measured trial records before mould handover. Keep settings, measurements and receiving-plant checks distinct.
Mould Cooling Circuit Handover: Map, Flow and Temperature RecordsInjection Moulding Weld Lines: Reviewing Predictions and Trial Acceptance
Review weld-line locations, simulation assumptions and separate appearance and functional acceptance before approving an injection mould.
Injection Moulding Weld Lines: Reviewing Predictions and Trial AcceptanceInsert Overmoulding: Substrate Location and Shut-off Checklist
Review how a plastic substrate is located, supported and sealed before insert overmoulding trials, with a practical record for drawings, samples and acceptance.
Insert Overmoulding: Substrate Location and Shut-off ChecklistTwo-Shot Injection Moulding: A Machine–Mould Interface Checklist
Before approving a two-shot mould, record the machine configuration, transfer envelope, injection interfaces and responsibilities in one controlled review sheet.
Two-Shot Injection Moulding: A Machine–Mould Interface ChecklistLight Guide Mould Design: Agreeing Gate Marks and Optical Acceptance
Turn a light-guide surface map into a review sheet for gate and ejector marks, inspection conditions and first-trial evidence.
Light Guide Mould Design: Agreeing Gate Marks and Optical AcceptanceAutomotive Lighting Mould RFQ: Optical Surfaces, 2K/3K Boundaries and Trial Evidence
A buyer checklist for headlamp, tail-lamp and light-guide tooling: define optical surfaces, resin grades, colour boundaries, machine interfaces and trial acceptance before comparing quotations.
Automotive Lighting Mould RFQ: Optical Surfaces, 2K/3K Boundaries and Trial Evidence2K vs 3K Moulding: Material Compatibility and Process Selection
Choose the shot sequence from the part requirements, exact resin grades, interface function and evidence needed to accept the samples.
2K vs 3K Moulding: Material Compatibility and Process SelectionTPE Overmoulding Adhesion: Grade Pairing, Failure and Trial Evidence
Review the exact substrate and TPE grades, separate interface failure from material tearing, and agree a comparable sample test record.
TPE Overmoulding Adhesion: Grade Pairing, Failure and Trial EvidenceInjection Mould RFQ Checklist: Drawings, Materials and Acceptance
Prepare drawing revisions, resin grades, appearance and assembly requirements, production demand and acceptance criteria before requesting a tooling quotation.
Injection Mould RFQ Checklist: Drawings, Materials and AcceptanceFirst Mould Trial Checklist: Dimensions, Assembly and Interfaces
Record dimensions, appearance, assembly fit, material interfaces and unresolved issues at the first mould trial, with agreed methods for the next review.
First Mould Trial Checklist: Dimensions, Assembly and InterfacesInside Jump Mould: From Product Idea to Tooling
Explore our workshop and catalogue examples, and prepare the information needed to discuss your tooling project.
Inside Jump Mould: From Product Idea to ToolingHow to Choose an Injection Mould Supplier
Compare suppliers using project-specific engineering questions, traceable trial records and a quotation with clear inclusions, assumptions and responsibilities.
How to Choose an Injection Mould SupplierWhat is an Injection Mold?
An introduction to injection mold components, the molding cycle and the path from design review to trial samples.
What is an Injection Mold?10 Injection Mould Design Checks Before Tooling Starts
A DFM checklist covering drawing control, draft, wall transitions, gates, cooling, vents, ejection, corners, shrinkage and alignment. Confirm each decision against the actual part and material.
10 Injection Mould Design Checks Before Tooling Starts